Juniper MX10008, Руководство по оборудованию

Страница: 116 / 361

Table 44: Power Specifications for the JNP10K-PWR-DC2 Power Supply (continued)
Specifications Item
2200 W for low input (60-A) single feed
4400 W for low input (60-A) dual feed
2750 W for high input (80-A) single feed
5500 W for high input (80-A) dual feed
Output power
Table 45 on page 117 shows the physical specifications for a JNP10K-PWR-DC2 power supply.
Table 45: Physical Specifications of a JNP10K-PWR-DC2 Power Supply
Value Specification
3.5 in. (8.89 cm) Height
3.6 in. (9.14 cm) Width
16.05 in. (40.77 cm) Depth
8.1 lbs (3.67 kg) Weight
MX10008 Grounding Cable and Lug Specifications
For installations that require a separate grounding conductor to the chassis, the router must be adequately
grounded before power is connected to ensure proper operation and to meet safety and electromagnetic
interference (EMI) requirements. To ground an MX10008 chassis, connect a grounding cable to earth
ground and then attach it to the chassis grounding point on the rear of the chassis beneath.
WARNING: The router is pluggable type A equipment installed in a restricted-access
location. It has a separate protective earthing terminal provided on the chassis in addition
to the grounding pin of the power supply cord. This separate protective earthing terminal
must be permanently connected to earth ground for installations that require a separate
grounding conductor to the chassis.
117