Juniper JUNOSE 11.1.X - SYSTEM EVENT LOGGING 3-24-2010, Справочное руководство

Страница: 41 / 294

<cr>
host1(config)#
log severity debug ppp pos 2/0
To obtain a list of the filters available in each event category, see “Event Categories”
on page 23
.
Turning Off Log Filters
You can turn off filters in three ways:
■
Turn off all filters
■
Turn off all filters for an event category
■
Turn off a specific filter
To turn off all filters:
host1(config)# no log filters
To turn off all filters for an event category, use the no version of the log severity
command along with the category name. For example:
host1(config)# no log severity bgpEvents filters
To turn off a specific filter, use the no version of the log severity command that you
used to add the filter. For example:
host1(config)# no log severity bgpEvents peer 10.0.0.2 10.0.0.1
no log filters
■
Use to turn off log filters.
■
To turn off all filters for an event category, specify the category name.
■
Example
host1(config)# no log filters
■
To turn off a specific filter, use the no version of the log severity command that
you used to add the filter.
■
See no log filters.
Monitoring Logging System Events
Use the show log configuration command to display your log configuration. Use the
show log data command to display system events on your screen.
You can use the output filtering feature of the show command to include or exclude
lines of output based on a text string you specify. See show Commands in JUNOSe
System Basics Configuration Guide for details.
Turning Off Log Filters
■ 17
Chapter 1: System Logging Overview