manualshive.com logo in svg

Juniper JUNOSE 11.0.X IP SERVICES, Руководство по настройке

Конфигурационное руководство Juniper JUNOSE 11.0.X IP SERVICES доступно бесплатно для скачивания на manualshive.com. Пользователи могут загрузить полное руководство, чтобы настроить продукт по своим потребностям. Получите доступ к необходимой информации для эффективного использования продукта.

Поделиться
Скачать
background image

When you configure the mobile host to use RADIUS authentication for home agent
users by including the 

aaa

 keyword in the 

ip mobile host

 command, the Mobile IP

home agent application generates a RADIUS access-request message. The RADIUS
server then uses Juniper Networks vendor-specific attributes (VSAs) to provide the
appropriate authentication algorithm and secure key for the authentication request.

For information about the specific Juniper Networks VSAs used for Mobile IP
RADIUS-based authentication, see 

JUNOSe Broadband Access Configuration Guide

 and

RADIUS IETF Attributes

Subscriber Management

The Mobile IP home agent interoperates with the subscriber management application
on E Series routers. The subscriber management application enables customers to
dynamically provision new IP subscribers and quickly create new value-added
services.

You can set up your subscriber management environment to create dynamic IP
subscriber interfaces to provision subscribers and provide differentiated service
delivery. In this configuration, the service parameters for an IP subscriber are bound
to a dynamic IP subscriber interface.

During the registration process when the Mobile IP home agent has authenticated
the subscriber with AAA, the home agent locates or creates the appropriate IP tunnel
to carry the data traffic to the foreign agent. When Mobile IP obtains all of the
parameters required for interface creation, including the tunnel ID and the
authentication context, it directs the subscriber management application to create
the dynamic IP subscriber interface.

During the re-registration process when there is a handoff from an initial Mobile IP
foreign agent to a new Mobile IP foreign agent, the home agent reauthenticates the
subscriber with AAA and locates or creates the appropriate IP tunnel to carry the
data traffic to the new foreign agent. When Mobile IP obtains all of the parameters
required for interface creation, it directs the subscriber management application to
move the dynamic IP subscriber interface from the initial tunnel for the previous
foreign agent to the new tunnel that points to the new foreign agent. If this was the
last subscriber on the tunnel for the previous foreign agent, then the home agent
directs the IP tunneling application to tear down the initial tunnel.

For more information about subscriber management and dynamic IP subscriber
interfaces, see 

JUNOSe Broadband Access Configuration Guide

. For more information

about dynamic IP subscriber interfaces, see 

JUNOSe Broadband Access Configuration

Guide

.

Mobile IP Routing and Forwarding

The home agent supports both generic routing encapsulation (GRE) and Distance
Vector Multicast Routing Protocol (DVMRP, also known as IP-in-IP) tunnel
encapsulation for forward and reverse tunneling. When packets destined for the
mobile node reach a home agent, the home agent encapsulates the packets and
tunnels them to the CoA. Packets that exceed the maximum transmission unit (MTU)
value of the tunnel are dropped and an ICMP error message is sent to the source IP
address. Packets without an access route are returned to the source with an ICMP

318

■

Mobile IP Overview

JUNOSe 11.0.x IP Services Configuration Guide

Содержание JUNOSE 11.0.X IP SERVICES















































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOSE 11.0.X IP SERVICES

F-SECURE MOBILE SECURITY 80 Series User Manual preview
MOBILE SECURITY 80 Series
Бренд: F-SECURE Страницы: 39
Am Mini-SOHO Quick Setup Manual preview
Mini-SOHO
Бренд: Am Страницы: 14
ScanSoft OMNIPAGE 15 Manual preview
OMNIPAGE 15
Бренд: ScanSoft Страницы: 94
MACROMEDIA COLDFUSION MX 61-GETTING STARTED BUILDING COLDFUSION... Getting Started preview
COLDFUSION MX 61-GETTING STARTED BUILDING COLDFUSION...
Бренд: MACROMEDIA Страницы: 134
JVC Blank Media LYT1015 Instructions Manual preview
Blank Media LYT1015
Бренд: JVC Страницы: 22
JVC ImageMixer 1.7 Instructions Manual preview
ImageMixer 1.7
Бренд: JVC Страницы: 43
JVC JLIP VIDEO CAPTURE Instructions Manual preview
JLIP VIDEO CAPTURE
Бренд: JVC Страницы: 56
JVC GR-DVL500U - Digital Camcorder Instructions Manual preview
GR-DVL500U - Digital Camcorder
Бренд: JVC Страницы: 72
JVC GZMG27US - Everio Camcorder - 680 KP Instructions Manual preview
GZMG27US - Everio Camcorder - 680 KP
Бренд: JVC Страницы: 72
JVC GZ-MG77U - Everio Camcorder - 2.18 MP Instructions Manual preview
GZ-MG77U - Everio Camcorder - 2.18 MP
Бренд: JVC Страницы: 72
JVC Digital Photo Navigator ImageMixer with VCD LYT1116-001A Instructions Manual preview
Digital Photo Navigator ImageMixer with VCD LYT1116-001A
Бренд: JVC Страницы: 50
JVC GZMG21US - Everio Camcorder - 680 KP Instructions Manual preview
GZMG21US - Everio Camcorder - 680 KP
Бренд: JVC Страницы: 72
M-Audio Jamlab User Manual preview
Jamlab
Бренд: M-Audio Страницы: 15
Red Hat ENTERPRISE 5.4 RELEASE NOTES Manual preview
ENTERPRISE 5.4 RELEASE NOTES
Бренд: Red Hat Страницы: 466
2Wire Third-Party Installation Manual preview
Third-Party
Бренд: 2Wire Страницы: 35
Hollow Sun Vox Continental Instructions Manual preview
Vox Continental
Бренд: Hollow Sun Страницы: 9
Juniper TePM Agent Release Note preview
TePM Agent
Бренд: Juniper Страницы: 9
Intel IT DIRECTOR Manual preview
IT DIRECTOR
Бренд: Intel Страницы: 43

Бренды по названию

Популярные бренды

Загрузить еще бренды