manualshive.com logo in svg

Juniper JUNOSE 11.0.X IP SERVICES, Руководство по настройке

Конфигурационное руководство Juniper JUNOSE 11.0.X IP SERVICES доступно бесплатно для скачивания на manualshive.com. Пользователи могут загрузить полное руководство, чтобы настроить продукт по своим потребностям. Получите доступ к необходимой информации для эффективного использования продукта.

Поделиться
Скачать
background image

■

See 

E120 and E320 Module Guide, Table 1, Modules and IOAs 

for detailed module

specifications.

■

See 

E120 and E320 Module Guide, Appendix A, IOA Protocol Support

 for information

about the modules that support IP tunnels.

Module Requirements

The supported modules for creating IP tunnels depends on the type of E Series router
that you have.

ERX7xx Models, ERX14xx Models, and the ERX310 Router

To create dynamic IP tunnels on an ERX7xx model, ERX14xx model, or an ERX310
router, you must install a Service line module (SM) or a module that supports the use
of shared tunnel-server ports. For information about installing modules in the ERX
routers, see the 

ERX Hardware Guide

.

SMs provide dedicated tunnel-server ports that are always configured on the module.
Unlike other line modules, SMs do not pair with corresponding I/O modules that
contain ingress and egress ports. Instead, they receive data from and transmit data
to other line modules with access to ingress and egress ports on their own associated
I/O modules. However, you must assign interfaces on other line modules or loopback
interfaces to act as source endpoints for the tunnel.

You can also create IP tunnels on router modules that support shared tunnel-server
ports. You can configure (provision) a shared tunnel-server port to use a portion of
the module's bandwidth to provide tunnel services. For a list of the modules that
support shared tunnel-server ports, see the 

ERX Module Guide

.

To configure IPSec transport mode in the GRE or DVMRP destination profile, you
must install an IPSec Service Module (ISM).

For information about configuring tunnel services on dedicated and shared
tunnel-server ports, see 

Managing Tunnel Service and IPSec Service Interfaces

 in 

JUNOSe

Physical Layer Configuration Guide

.

All line modules forward traffic to IP tunnels. For information about which line
modules accept traffic for IP tunnels, see the 

ERX Module Guide

.

E120 Router and E320 Router

To create dynamic IP tunnels on an E120 router or an E320 router, you must install
an ES2 4G line module (LM) with an ES2-S1 Service I/O adapter (IOA), or an IOA that
supports the use of shared tunnel-server ports. For information about installing
modules in these routers, see the 

E120 and E320 Hardware Guide

.

The ES2 4G LM and ES2-S1 Service IOA combination provides a dedicated
tunnel-server port that are always configured on the IOA. Unlike SMs, the ES2 4G
LM requires the ES2-S1 Service IOA to condition it to receive and transmit data to
other line modules. The ES2-S1 Service IOA also does not have ingress or egress
ports.

264

■

Platform Considerations

JUNOSe 11.0.x IP Services Configuration Guide

Содержание JUNOSE 11.0.X IP SERVICES















































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOSE 11.0.X IP SERVICES

TAA Amanda User Manual preview
Amanda
Бренд: TAA Страницы: 28
Ulead COOL 3D-PLUG-IN MADNESS II Manual preview
COOL 3D-PLUG-IN MADNESS II
Бренд: Ulead Страницы: 10
UMAX Technologies PowerColor Quick Start Manual preview
PowerColor
Бренд: UMAX Technologies Страницы: 10
Nero Nero Express 9 Manual preview
Nero Express 9
Бренд: Nero Страницы: 76
MAGIX VIDEO EASY3hd Manual preview
VIDEO EASY3hd
Бренд: MAGIX Страницы: 88
Ulead COOL 3D 3.0 Manual preview
COOL 3D 3.0
Бренд: Ulead Страницы: 80
Roxio Toast 6 Titanium Getting Started Manual preview
Toast 6 Titanium
Бренд: Roxio Страницы: 132
F-SECURE POLICY MANAGER 8.0 Administrator'S Manual preview
POLICY MANAGER 8.0
Бренд: F-SECURE Страницы: 221
Genius VIDEOCAM SLIMCLIP Installation Manual preview
VIDEOCAM SLIMCLIP
Бренд: Genius Страницы: 7
Qlogic SANsurfer FC HBA Manager Application User Manual preview
SANsurfer FC HBA Manager Application
Бренд: Qlogic Страницы: 218
Cabletron Systems SEHI-22/24 User Manual preview
SEHI-22/24
Бренд: Cabletron Systems Страницы: 90
Xerox -05W User Manual preview
-05W
Бренд: Xerox Страницы: 370
Xerox DocuColor 30 Pro Manual preview
DocuColor 30 Pro
Бренд: Xerox Страницы: 292
Rane SIXTY-EIGHT Quick Start Manual preview
SIXTY-EIGHT
Бренд: Rane Страницы: 8
Xerox DocuColor 250 Online Help Manual preview
DocuColor 250
Бренд: Xerox Страницы: 378
Waves Dynamics Processor MV2 User Manual preview
Dynamics Processor MV2
Бренд: Waves Страницы: 13
Canon VB-M40 Administrator'S Manual preview
VB-M40
Бренд: Canon Страницы: 104
Garmin eTrex Vista C Software Manual preview
eTrex Vista C
Бренд: Garmin Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды