Juniper JUNOSe 10.0.3, Руководство по выпуску

Страница: 13 / 122

Release Overview
„ 5
Release 10.0.3
Release Overview
These Release Notes cover Release 10.0.3 of the system software for the Juniper
Networks E Series Broadband Services Routers and contain the following sections:
„ Release Highlights on page 7
„ Early Field Trial Features on page 7
„ Unsupported Features on page 8
„ Release Software Protocols on page 9
„ SRC Software and SDX Software Compatibility Matrix on page 11
„ Known Behavior on page 11
„ Known Problems and Limitations on page 35
„ Resolved Known Problems on page 51
„ Errata on page 55
„ Appendix A, System Maximums , on page 67
„ Appendix B, Module Name Cross-Reference Information , on page 107
„ Appendix C, Transferring DSL Line Rate Information from an Access Node to SRC
Software
, on page 109
If the information in these Release Notes differs from the information found in the
published documentation set, follow these Release Notes .
Before You Start
These Release Notes include information about the changes between Releases
10.0.2 and 10.0.3. Before you use your new software, read these Release Notes in
their entirety, especially the section Known Problems and Limitations . You need the
following documentation to fully understand all the features available in Release
10.0.3:
„ These 10.0.3 Release Notes, which describe changes between Release 10.0.2
and Release 10.0.3
„ The 10.0.2 Release Notes, which describe features available in Release 10.0.2
„ The 10.0.x documentation set, which provides detailed information about
features available in Release 10.0.0
The 10.0.x documentation set consists of several manuals and is available only in
electronic format. You can print your own documentation using the PDF and HTML
formats available at the Juniper Networks Technical Documentation Web site at
www.juniper.net/techpubs. Refer to the following table to help you decide which
document to use.