Juniper Junos Space JA1500, Руководство по оборудованию

Страница: 61 / 210

CHAPTER 7
Performing Initial Configuration
• Booting the Junos Space Appliance on page 47
• Configuring a Junos Space Appliance as a Junos Space Node on page 48
•
Configuring a Junos Space Appliance as a Standalone or Primary FMPM
Node on page 70
• Configuring a Junos Space Appliance as a Backup or Secondary FMPM Node for High
Availability on page 80
•
Changing Network and System Settings for a Junos Space Appliance on page 87
•
Installing a Junos Space Image on a Junos Space Appliance by Using a USB
Drive on page 96
• Powering Off the Junos Space Appliance on page 102
Booting the Junos Space Appliance
NOTE: If you have turned on power to the power supply module, then the
Junos Space Appliance starts booting automatically.
Before you begin booting the Junos Space Appliance, ensure that you have:
•
Connected the Junos Space Appliance to a management console.
• Configured a console terminal or terminal emulation utility to use the following serial
connection parameters:
•
Baud rate: 9600 bits per second
•
Data: 8 bits
• Flow control: None
• Parity: None
•
Stop bits: 1
To boot the Junos Space Appliance, do the following:
1.
Power on the management device (PC or laptop) that is connected to the appliance’s
console port.
47 Copyright © 2018, Juniper Networks, Inc.