Intrusion Detection and Prevention (IDP) 4.2
4
Downloading and Installing the Updated Network Driver Patch IDP 8200
8.
Click the
Change Sensor Mode
link.
9.
Complete the configuration for the new interfaces as described in the online
help.
10. In NSM, use the Device Manager or Policy Manager to update the IDP policy
and push it to the sensor. For details on using NSM, see the
Juniper Networks
Netscreen-Security Manager Administrator’s Guide
and the NSM online help.
3
Downloading and Installing the Updated Network Driver Patch IDP 8200
For IDP 8200 appliances running software version 4.2r1, you must download and
install an updated network driver patch to support the following I/O modules.
I/O modules not listed do not require the updated network driver patch.
To install the network driver patch, follow these steps:
1.
If you have not done so already, go to the Juniper Networks Customer Support
Center and download the updated network driver patch.
a.
Go to
https://www.juniper.net/customers/csc/software/
and log in with
your customer user name and password.
b.
Navigate to navigate to
IDP > ScreenOS Software Downloads (including
NSM/Global Pro, STRM, IDP and NetScreen-Remote) > 4.2
.
c.
Download the patch for IDP 8200 I/O modules to your local host.
2.
Open an ssh connection to the IDP appliance and log in as the user
admin
.
3.
Switch to the superuser
root
. For example:
[admin@defaulthost]# su -
Password:
[root@defaulthost]#
4.
Copy the file
Jnet_Driver_Patch_1_0.sh
from your local host to a temporary
directory on the IDP appliance, such as
/tmp
.
5.
Execute the patch file. For example:
[root@defaulthost tmp]# sh Jnet_Driver_Patch_1_0.sh
Checking file integrity.....................................ok
IDP-1GE-4SX-BYP
4-port 1 GigE SX fiber interface card with bypass
IDP-10GE-2SR-BYP
2-port 10 GigE SR interface card with bypass
IDP-10GE-2XFP
2-port 10 GigE XFP interface card (non-bypass)
NOTE:
You cannot install the updated network driver patch using NSM. You must
be able to make an ssh connection to the IDP appliance and switch user to the
superuser
root
to run the installation script.