Juniper IDP 250, Руководство по установке

Страница: 35 / 68

Initial Configuration Options
„ 21
Chapter 4
Configuring the IDP Sensor
This chapter describes how to connect to the IDP sensor and configure the device
for your network. After you have configured the sensor, you need to connect the
device in your network.
This chapter has the following sections:
„ Initial Configuration Options on page 21
„ Connecting to the Sensor on page 22
„ Connecting Forwarding Interfaces on page 28
„ Verifying Traffic Flow on page 28
„ Connecting the High Availability Port on page 28
Initial Configuration Options
When you first configure your sensor, you can choose a simple configuration that
sets options to the most commonly used settings, or you can do an advanced
configuration that allows you to choose each option individually.
Simple Configuration
A simple configuration can be done using the console serial port and the
EasyConfig utility, or through the management port and the QuickStart utility.
Simple Configuration Settings
A simple configuration lets you specify the following settings:
„ Sensor mode (inline transparent or passive sniffer)
„ IP address
„ Netmask
„ Default gateway
„ Time and time zone