Juniper EX9208, Руководство по оборудованию, Страница: 315 / 396

Wait until a message appears on the console confirming that the operating system
has halted.
For more information about the command, see the CLI Explorer .
3.
Attach an ESD grounding strap to your bare wrist, and connect the strap to one of the
ESD points on the chassis.
4.
Shut down power to the switch by pressing the AC input switch or DC circuit breaker
for all power supplies to the Off (
O
) position.
5.
Disconnect power from the switch.
6.
Remove the cables that connect to all external devices.
7.
Remove all field replaceable units (FRUs) from the switch.
8.
Remove the switch from the rack:
•
If you are using a mechanical lift, place the lift platform under the switch, unscrew
and remove the mounting screws from the rack, and move the switch to the shipping
crate.
• If you are not using a mechanical lift and the switch weight is fully supported by a
shelf or another switch, unscrew and remove the mounting screws from the rack.
Three people can then lift the switch and move it to the shipping crate.
• If you are not using a mechanical lift and the switch weight is not fully supported
by a shelf or another switch, three people must grasp the switch while a fourth
person unscrews and removes the mounting screws from the rack. The three people
can then move the switch to the shipping container.
9.
Place the switch in the shipping crate or onto the pallet. If on a pallet, bolt the switch
to the pallet.
10.
Cover the switch with an antistatic bag and place the packing foam on top of and
around the switch.
11.
Replace the accessory box on top of the packing foam.
12.
Securely tape the box closed or place the crate cover over the switch.
13.
Write the RMA number on the exterior of the box to ensure proper tracking.
Packing EX9200 Switch Components for Shipping
To pack EX9200 switch components, follow the instructions here.
Before you begin packing a switch component, ensure that you have the following parts
and tools available:
•
Antistatic bag, one for each component
•
ESD grounding strap
291 Copyright © 2017, Juniper Networks, Inc.
Chapter 27: Contacting Customer Support and Returning the Chassis or Components