Juniper EX4600, Руководство по оборудованию

Страница: 37 / 230

CHAPTER 4
Modules
• Expansion Modules for the EX4600 on page 19
Expansion Modules for the EX4600
The EX4600 switch has two bays on the port panel for optional expansion modules. The
EX4600 supports two expansion modules to increase port density:
• EX4600-EM-8F, which provides 8 additional 10-Gigabit Ethernet Enhanced Small
Form-Factor Pluggable (SFP+) ports.
•
QFX-EM-4Q, which provides 4 additional 40-Gigabit Quad SFP+ (QSFP+) ports.
The EX4600 is configured for the QFX-EM-4Q by default, but any combination of the
two modules is supported. Expansion modules can be hot-inserted or hot-removed.
However, when an EX4600-EM-8F is inserted instead of the default QFX-EM-4Q, the
new configuration causes the interfaces to temporarily go down. Likewise when an
EX4600-EM-8F is running on the EX4600 and it is swapped with a QFX-EM-4Q, the
interfaces temporarily go down, which can cause a short disruption in traffic.
NOTE: Expansion modules and transceivers are not shipped with the switch
and must be ordered separately.
•
EX4600-EM-8F on page 19
•
QFX-EM-4Q on page 20
EX4600-EM-8F
The EX4600-EM-8F, provides 8 additional 10-Gigabit Ethernet SFP+ ports to one of the
bays in the EX4600 switch.
Figure 9 on page 20 shows the ports and LEDs on the
expansion module.
19 Copyright © 2014, Juniper Networks, Inc.