Juniper EX4200 Series Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 344

Juniper EX4200 Series Скачать руководство пользователя страница 42

Figure 7: SFP+ and SFP+ MACsec Uplink Module

The following transceivers can be installed in the uplink module ports:

•

SFP+ transceivers are supported in ports 0 and 2.

•

SFP transceivers are supported in all four ports.

The ports that support SFP+ transceivers are labeled 10 G on the uplink module’s
faceplate (see

Figure 7 on page 20

).

NOTE:

When an SFP+ or SFP+ MACsec uplink module is operating in

10-gigabit mode:

•

Only the 10-gigabit ports (ports 0 and 2) are enabled.

•

You can use only SFP+ transceivers in those ports.

When an SFP+ or SFP+ MACsec uplink module is operating in 1-gigabit mode:

•

All four ports are enabled.

•

You can use only SFP transceivers in all four ports.

The SFP+ and SFP+ MACsec uplink module has an LED on the faceplate (labeled
Operating mode LED in

Figure 7 on page 20

) that indicates the operating mode. If the

uplink module is operating in the 10-gigabit mode, the LED is lit. If the uplink module is
operating in the 1-gigabit mode, the LED is unlit.

SFP+ and SFP+ MACsec uplink modules are shipped with dust covers preinstalled in the
ports.

The SFP+ uplink module requires Junos OS for EX Series switches, Release 9.4 or later.
The SFP+ MACsec uplink module requires Junos OS for EX Series switches, Release
13.2X50-D10 or later.

Copyright © 2015, Juniper Networks, Inc.

20

EX4200 Switch Hardware Guide

«
...
40
41
42
43
44
...
»

Содержание EX4200 Series

























































































































































































































































































































































Отзывы:

Нет отзывов