2>/dev/null)
10. (Optional) Give the router a name. If the name includes spaces, enclose the name in quotation marks (“ ”).
[edit]
root@re0#
set system host-name host-name
11. Configure the default gateway.
[edit]
root@re0#
set routing-options static route 0.0.0.0/0 next-hop destination-ip
12. Configure the IP address and prefix length for the management port on the router.
On the ACX7100-48L, the management (MGMT) port is the upper RJ-45 port on the right side of the port panel.
[edit]
root@re0#
set interfaces re0:mgmt-0 unit 0 family inet address address/prefix-length
13. (Optional) Configure specific static routes to remote prefixes if you do not want the remote prefixes to use the default
route.
[edit]
root@re0#
set routing-options static route address/prefix-length next-hop destination-ip
14. Enable Telnet service, if required.
[edit]
root@re0#
set system services telnet
NOTE:
When Telnet is enabled, you cannot log in to the ACX7100-48L through Telnet using root credentials.
Root login is allowed only for SSH access.
15. Enable SSH service.
[edit]
root@re0#
set system services ssh
16. To allow users to log in to the router as root through SSH, include the root-login statement.
[edit system services ssh]
root@re0#
root-login allow
10