How to Set Up Your CBA850 3G/4G/LTE Wireless WAN Bridge
5
6. Power on the device.
7. Connect an Ethernet cable to the LAN 1 port for local management. Connect
LAN 2 (Default IP Passthrough 0/24) to the services gateway to pass through
3G/4G Internet traffic to the Ethernet.
NOTE:
We recommend that you mount the device on a wall in a vertical
position. Horizontal mounting or ceiling mounting at locations where
ambient temperatures exceed 40°C (104°F) is not recommended.
g009241
Access the Administration Pages
The CBA850 can be used immediately without any configuration changes. If
you want to configure any of the advanced features, log in to the administration
pages.
To access the administration pages:
1. Open a browser window and type cp/ or 192.168.0.1 in the address bar. Press
Enter.
2. When prompted for your password, type the eight-character default
password found on the product label.
Your unique default password is shown on the product label on the bottom of
your CBA850.
