.02.
JNR MINI BEAM 230
Signal Cable
Power Cable
Safety Cable
User Manual
Omega Clamp
1PC
1PC
1PC
2PC
1PC
1PC
①
②
③
④
⑤
⑥
Thank you for choosing our JNR MINI BEAM 230. For your own safety, please read this
manual before installing the device. This manual covers the important information on
installation and applications. Please install and operate the fixture with following
instructions. Meanwhile, please keep this manual well for future needs.
The
is made of a new type of high temperature strength of
engineering plastics and cast aluminum casing with nice outlook . The fixture is
designed and manufactured strictly following CE standards, complying with
international standard DMX512 protocol. It’s available independently controlled and
linkable with each other for operation. And it is applicable for large-scale live
performances, theater, studio, nightclubs and discos.
The JNR MINI BEAM 230 adopts a OSRAM 230W lamp which features high brightness
and stability. Please carefully unpack it when you receive the fixture and check
whether it is damaged during the transportation. And please check whether the
following items are included inside the box:
JNR MINI BEAM 230
UNPACKING
2
①
②
④
⑤
⑥
③
Euro Standard
UK Standard
USA Standard
OPTIONAL
The following points have to be considered during the inspection:
1) All screws for installing the devices or parts of the device have to be tightly
connected and must not be corroded.
2) There must not be any deformations on the housing, color lenses, fixations and
installation spots (ceiling, suspension, trussing).
3) Mechanically moved parts must not show any traces of wearing and must not
rotate with unbalances.
4) The electric power supply cables must not show any damage, material fatigue or
sediments.
Further instructions depending on the installation spot and usage have to be
adhered by a skilled installer and any safety problems have to be removed.
In order to make the lights in good condition and extend the life time, we suggest a
regular cleaning to the lights.
1) Clean the inside and outside lens each week to avoid the weakneness of the lights
due to accumulation of dust.
2) Clean the fan each week .
3) A detailed electric check by approved electrical engineer each three month, make
sure that the circuit contacts are in good condition, prevent the poor contact of
circuit from overheating.
We recommend a frequent cleaning of the device. Please use a moist, lint- free cloth.
Never use alcohol or solvents.
There are no ser viceable parts inside the device. Please refer to the instructions
under “Installation instructions”.
Should you need any spare parts, please order genuine parts from your local dealer.
MAINTENANCE AND CLEANING
10
Disconnect from mains before starting maintenance operation.
CAU T I O N
.13.
