3 | INSTALLATION
Repeater Operation Manual
Version 2.00
Model
: JL20
©
2008 Juni | America Inc
.
3.5.1.2
Drywall (Gypsum/Plasterboard) Mounting
1) Using the Bracket B as a template, mark the location of the four holes to be screwed.
2) Screw the drywall anchors to the four marked holes as shown below.
3) Firmly attach the Bracket B to the drywall using the anchor screws as shown below.
[Figure 11] Mounting Bracket – Drywall Mounting
3.5.1.3
Concrete Mounting
1) Using the Bracket B as a template, mark the location of the four holes to be drilled.
2) Drill four 6mm holes 30~40mm deep. Insert plastic anchors into the holes.
3) Firmly attach the Bracket B to the surface by using the screws as shown below.
[Figure 12] Mounting Bracket – Concrete Mounting
