Jungle Hobbies Advanced LED Lighting System is specially designed for terrariums
and fresh water planted aquaria. It offers the most realistic lighting for animals and the
necessary wavelengths for plants to
photosynthesize properly. LL-4800N utilizes the
optimum spectrum-6500K as a main lighting for a
terrarium or aquarium. This closely resembles the
spectrum of natural sunlight.
Color spectrum
12
Product Specification
13
COLOR TEMP
FOR WHITE LED
LUMENS
6500K
14000LM
MODEL
ITEM SIZE(CM)
INPUT
VOLTAGE
TOTAL LED POWER
192W
LL-4800N
100V-240V
LED QTY
GREEN 2W x 6PCS
RED 2W x 6PCS
WHITE 40W x 4PCS
BLUE 0.06W x 12PCS
YELLOW 2W x 4PCS
Photosynthesis
Photosynthesis is a process by which most plants and organisms capture light energy
from the sunlight to drive the chemical process necessary to power the organisms'
metabolism. Photosynthesis plays an essential role for all living organisms and their
ecosystems. The diagram to the right
illustrates that Chlorophyll A and Chlorophyll B
are the two most dominant forms needed for
healthy ecosystems in terrariums and
vivariums.
11
4 0 0
5 00
60 0
70 0
100
75
50
25
0
Wavelength
A
b
s
o
rp
ti
o
n
(%
)
chlorophyll a
carotenoids
chlorophyll b
Troubleshooting
The light
does not work
Problem
Make sure the lighting unit is
connected to power
Connect it to the power
Use press to set the current
time appropriately
No response
with remote
controller
The screen
displays
Check if the light is the Network
mode or OFF mode.
Press to return to automatic
running mode
Check if the IR remote
battery is drained.
Replace the remote battery with
CR2025
Point the remote to the receiver
side of the light. The Side with
the digital display.
Check if the remote is being
pointed to the correct side of
the light.
Repair/replace the smart fan
by a professionals or return it to
the dealer if within warranty.
Check if the smart fan does not
work normally
Avoid objects into the light.
Keep the slot and ventilation
opening clean, they should not
be blacked and covered
Check if the slot and ventilation
are blocked and covered
Use time setting keys to adjust
the time appropriately. Or use
to reset to factory settings
Check if the light is in the
Network mode or OFF mode.
Check if the lights is currently
in the OFF part of the program
Check if the brightness level
is set to “0” (zero)
Use time setting keys to adjust
the time appropriately
The light is
always ON
Check if the total time period is
over 24 hours
Check if the current time is
same as the real time
Verify
Solution
Press to return to automatic
running mode
Press , , , or to
adjust the brightness level
14
86.5 X 16 X 6.5H CM / 34 X 6.3 X 2.6H INCH
20
19
