17
11
.1
4
E
N
Drive system
A fixed AC three-phase motor actuates the drive wheel via a bevel spur gearbox. The
electronic traction controller ensures smooth drive-motor-speed control and hence
smooth starting, powerful acceleration and electrically controlled braking with energy
regeneration. The driver can choose from 3 travel programs depending on the load
and the environment: from high-performance to energy-saving.
Controls and displays
Ergonomic controls ensure fatigue-free operation for sensitive application of the
travel and hydraulic operations. The charge indicator shows the available battery
capacity. The control and display unit (
o
) shows the key operator information such
as battery capacity, service hours and event messages.
Steering
The operator steers with an ergonomically inclined steering wheel. The steering
motion is transmitted from the steering controller via a steer motor directly to the ring
gear of the pivoted drive system. The steering wheel has a steer angle of 180°.
Automatic travel speed reduction as a function of the steer angle (Curve Control
o
)
is optionally available.
Hydraulic system
Infinitely variable lifting and lowering operations are performed by moving the Multi-
Pilot forward and back. When lifting is activated, the pump unit starts to operate,
supplying hydraulic oil from the oil reservoir to the lift cylinder.
If the truck is fitted with the "z" auxiliary lift, the wheel arms can be raised and lowered
via buttons. When the lift button is pressed the wheel arms are raised at an even
speed; when the lower button is pressed the wheel arms are lowered. When the
wheel arms are raised (initial lift) the lift height is restricted. When the lift height
exceeds 1800 mm the wheel arms lower automatically. The wheel arms can only be
lowered below this lift height.
Mast
The high strength steel sections are narrow, enabling excellent visibility of the load
handler. The lift rails and the load handler run on permanently-lubricated and hence
maintenance-free angled rollers.
3.2.1 Hourmeter
Z
Prepare the truck for operation, see "Preparing the truck for operation" on page 51
or see "Keypad (CanCode) (
o
)" on page 83.
Service hours are counted while the truck is operational and the deadman button is
pressed.
Содержание ESC 316
