Jungheinrich EKE 30-2 ac, Руководство по эксплуатации

Страница: 28 / 49

E 5
0903
.GB
Fastening the safety seat belt
f
Fasten the safety seat belt (21) each time you ride on the truck! The seat belt buckle
must audibly engage when being closed. Make sure the seat belt (21) runs tightly
across your pelvis and is not distorted (do not run it over hard or fragile objects in your
pockets). The seat belt (21) should be as tight across your pelvis as possible.
Opening the safety seat belt
– Press the red button in the buckle.
f
The seat belt (21) must not be pinched or chafe on sharp edges.
Switching on the truck
A
When the truck is parked, the running surface of the tyres will flatten. These
flattenings will disappear after travelling for a while.
– Pull out the main switch (11).
– Insert the key in the key switch (10) and turn it all the way to the right to position “I”.
– Test the function of the warning signal (7).
The truck is now ready for operation. The information and service display (LISA)
indicates the residual battery capacity.
– Check the function of the brake pedal (15) and the parking brake (9) (see section
4.2).
– The information and service display (LISA) indicates the current steering angle.
2
7
11 10
9
15
8
E 5
0903
.GB
Fastening the safety seat belt
f
Fasten the safety seat belt (21) each time you ride on the truck! The seat belt buckle
must audibly engage when being closed. Make sure the seat belt (21) runs tightly
across your pelvis and is not distorted (do not run it over hard or fragile objects in your
pockets). The seat belt (21) should be as tight across your pelvis as possible.
Opening the safety seat belt
– Press the red button in the buckle.
f
The seat belt (21) must not be pinched or chafe on sharp edges.
Switching on the truck
A
When the truck is parked, the running surface of the tyres will flatten. These
flattenings will disappear after travelling for a while.
– Pull out the main switch (11).
– Insert the key in the key switch (10) and turn it all the way to the right to position “I”.
– Test the function of the warning signal (7).
The truck is now ready for operation. The information and service display (LISA)
indicates the residual battery capacity.
– Check the function of the brake pedal (15) and the parking brake (9) (see section
4.2).
– The information and service display (LISA) indicates the current steering angle.
2
7
11 10
9
15
8