Jungheinrich EJD K18, Руководство по эксплуатации

Страница: 31 / 81

0205
.GB
D 8
7 Battery Discharge Indicator (
t
)
When the truck has been released via the
keyswitch or CANCODE, the battery charge
status is displayed.
The colours of the LEDs (10) represent the following conditions:
Z
If the LED is red, load units can no longer be lifted. Lifting is only released when the
battery connected is at least 70 % charged.
If the charge status calculated when the truck is switched on is at least 70% of that of
a fully charged battery, the display is reset to 100%. The display reduces in
increments of 10% depending on the charge status. The displayed status is reduced
to a maximum of 10% within 3 minutes.
The displayed status cannot rise again during the present operation.
The status display is reset to 100% when the battery type is adjusted.
If the LED flashes red and the truck is not ready for operation, inform the
manufacturer's service department. Red flashing is a fault code of the truck controller.
The flashing sequence indicates the type of fault.
LED colour Rating
Green Standard battery residual capacity 40 - 100%
Maintenance free battery residual capacity 60 - 100%
Orange Standard battery residual capacity 30 - 40%
Maintenance free battery residual capacity 50 - 60%
Green/orange
Flashing. 1Hz
Standard battery residual capacity 20 - 30%
Maintenance free battery residual capacity 40 - 50%
Red Standard battery residual capacity 0 - 20%
Maintenance free battery residual capacity 0 - 40%
10
0205
.GB
D 8
7 Battery Discharge Indicator (
t
)
When the truck has been released via the
keyswitch or CANCODE, the battery charge
status is displayed.
The colours of the LEDs (10) represent the following conditions:
Z
If the LED is red, load units can no longer be lifted. Lifting is only released when the
battery connected is at least 70 % charged.
If the charge status calculated when the truck is switched on is at least 70% of that of
a fully charged battery, the display is reset to 100%. The display reduces in
increments of 10% depending on the charge status. The displayed status is reduced
to a maximum of 10% within 3 minutes.
The displayed status cannot rise again during the present operation.
The status display is reset to 100% when the battery type is adjusted.
If the LED flashes red and the truck is not ready for operation, inform the
manufacturer's service department. Red flashing is a fault code of the truck controller.
The flashing sequence indicates the type of fault.
LED colour Rating
Green Standard battery residual capacity 40 - 100%
Maintenance free battery residual capacity 60 - 100%
Orange Standard battery residual capacity 30 - 40%
Maintenance free battery residual capacity 50 - 60%
Green/orange
Flashing. 1Hz
Standard battery residual capacity 20 - 30%
Maintenance free battery residual capacity 40 - 50%
Red Standard battery residual capacity 0 - 20%
Maintenance free battery residual capacity 0 - 40%
10