1007
.GB
E 24
Start Travel Program Setting with Code Lock post-06.07
The travel programs are connected to the user code. The travel programs can be
individually released or blocked for each user code. A start travel program can be
assigned to each user code.
When a user code has been set up, all travel programs are globally released and the
valid start travel program is 2.
The user code configuration can then be altered via program number 024.
024 - SET - user code - SET - configuration (4 digit) -
SET - Configuration confirmation (4 digit) - SET
1st digit: travel program 1 release (0 or 1)
2nd digit: travel program 2 release (0 or 1)
3rd digit: travel program 3 release (0 or 1)
4th digit: start travel program (0, 1, 2 or 3)
Error messages on keypad
LED (21) flashes red to indicate the following errors:
– New master code is already operator code.
– New operator code is already master code.
– Operator code to be changed does not exist.
– Tried to change the operator code to an existing code.
– Operator code to be deleted does not exist.
Code memory full
No.
Function
Setting
range
Standard
setting
Comments
Procedure
Code Lock
024 User code
configuration
0-3
1112
1007
.GB
E 24
Start Travel Program Setting with Code Lock post-06.07
The travel programs are connected to the user code. The travel programs can be
individually released or blocked for each user code. A start travel program can be
assigned to each user code.
When a user code has been set up, all travel programs are globally released and the
valid start travel program is 2.
The user code configuration can then be altered via program number 024.
024 - SET - user code - SET - configuration (4 digit) -
SET - Configuration confirmation (4 digit) - SET
1st digit: travel program 1 release (0 or 1)
2nd digit: travel program 2 release (0 or 1)
3rd digit: travel program 3 release (0 or 1)
4th digit: start travel program (0, 1, 2 or 3)
Error messages on keypad
LED (21) flashes red to indicate the following errors:
– New master code is already operator code.
– New operator code is already master code.
– Operator code to be changed does not exist.
– Tried to change the operator code to an existing code.
– Operator code to be deleted does not exist.
Code memory full
No.
Function
Setting
range
Standard
setting
Comments
Procedure
Code Lock
024 User code
configuration
0-3
1112
Содержание ECE 220
