Jungheinrich Easy Access Transponder Stand-Alone, Руководство по эксплуатации

Страница: 21 / 28

21
2.3.1 Activating the transponder reader
Procedure
• Release
the emergency
disconnectswitch.
• Enter the default code 1-2-3-4 using
thekeys below the display unit (3). The
truck is switched on.
• Press
the key below the
"Settings"symbol (6).
• Press the key below the "Change set-
upcode" symbol (7).
• Enter the set-up code 2-4-1-2 using
thekeys below the display unit (3). The
set-up code entered is displayed.
• Press the key below the "Delete"symbol
(8).
The set-up code is deleted.
• Hold a transponder in front of
thetransponder reader (4).
This transponder thus becomes the
setup transponder.
• Press
the key below the
"Confirm"symbol (9).
The ID of the set-up transponder is
displayed.
If the wrong transponder has been used,
the procedure can be repeated using
the key below the "Delete" symbol (8).
• To return to the main menu, press
thekey below the "Back" symbol (10).
The default code can no longer be used
and must be deleted.
• Delete the default code, see page 26.
• Add new transponders, see page 25.
The transponder reader is now active.
10