Step 8:
Clean the reverse side of the glass
prior to fitting.
Step 9:
Check that the glass is positioned
parallel to the insert edge.
Step 10:
Apply glass precisely to the inner
edge of the case. Release the glass
gripper and raise.
Step 12:
Press on the glass gently to check
that it is seated securely. The glass
may click into place.
Step 12 A:
Check that the spacer is seated
correctly. The spacer should not be
visible.
Step 11:
Place the glass gripper onto the
watch and release. When raising
the gripper press downwards on the
glass lightly with the finger to push
it from the glass gripper.
Step 13:
Check that the glass is seated
correctly.
Step 14:
Open glass gripper by pressing
outwards and remove insert.
