junger MIX4, Руководство по эксплуатации, Страница: 26 / 72

Jünger Audio-Studiotechnik GmbH
page 23
Presets :
In addition to the Operator specific Snap Shots, there are 100 Presets which are accessible to all Operators
in common.
These represent audio parameter of a single source which can be loaded into any Channel Strip to
make settings for certain narrators available for all Operators, for example.
The presets have default names PREST 1 to PREST100. A preset (including preset name) can be edited by
aid of a tool called Operator / Preset / Backup / Restore (OPBR).
The
Preset management is done via the <USER> function as well. If the function in channel B is
“ PrstLoad” (preset load) a stored PRSETxxx is selected by turning Channel Rotary Knob B .
Pushing one of the Channel Buttons A - D will load the selected Preset into that channel, applying it to the
source assigned to that Channel Strip.
L C R 1 2 3 4 L C R 1 2 3 4 L C R 1 2 3 4 L C R 1 2 3 4
S e l E c t P R s t L o a d S N p L o a d S n P S t o r e
O p r T r 1 P R E S T 1 S N A P 1 S N A P 1
PFL PFL PFL PFL
If the current Operator has been allowed by the Administrator to
store presets , then this function can be
selected by pressing the Rotary Knob in channel B .
It then toggles between “PrstLoad” and “PrstStor” :
L C R 1 2 3 4 L C R 1 2 3 4 L C R 1 2 3 4 L C R 1 2 3 4
S e l E c t P R s t S t o r S n p L o a d S n P S t o r E
O p r T r 1 P R E S T 1 S N A P 1 S N A P 1
Turning the Rotary Knob in channel
B selects a PRESTxxx (preset memory) again. By pressing one of the
four Channel Buttons the audio parameter of that channel will be stored into the selected Preset memory :
L C R 1 2 3 4 L C R 1 2 3 4 L C R 1 2 3 4 L C R 1 2 3 4
S E l e c t P R s t S t o r S N p L o a d S n p S t o r e
O P r t r 1 P R E S T 1 S N A P 1 S N A P 1
PFL PFL PFL PFL
Preset short cuts:
If <DSP> is active, you can load one of the presets 1 to 8 to a predefined Channel Strip
by pressing one of the <USERx> or <BUSx> buttons .