5.2 Commissioning
Load physical address
o
Press the programming button (14).
The programming LED lights up.
o
Assign physical address.
The programming LED goes out.
Loading the application software
i
The configuration and commissioning are performed using external configuration and
commissioning software.
i
Preset IP address at delivery: 192.168.178.112
o
Establish connection to the commissioning PC via IP connection.
o
Download configuration data with the commissioning software.
- or -
Configuration data is saved on a USB stick or SD card.
o
Insert USB stock or SD card into the appropriate slot – (4) or (7). In KNX user interface,
select the settings icon
‘
and then the "Import" entry. Select disk drive and path and open
the file with the configuration data.
6 Appendix
6.1 Technical data
Supply
Rated voltage
AC 110 ... 230 V ~
Mains frequency
50 / 60 Hz
Fine-wire fuse
Littelfuse/Wickmann 372 1160 T 1.6 L 250
Standby power
max. 1 W
Power consumption
max. 20 W
Power consumption
max. 8 W (Display off)
Ambient conditions
Ambient temperature
0 ... +35 °C
Storage/transport temperature
-10 ... +70 °C
Relative humidity
15 ... 85 % (No moisture condensation)
Safety class
II
System
Processor type
Intel Atom
TM
Z510
Clock speed
1.1 GHz
L2 cache
512 kB
System chipset
Intel System-Controller Hub US15W
Mass storage
2 GB SSD
RAM
1 GB RAM
Audio controller
Realtek ALC888
Display
Type
TFT 22.9 cm [9"], WVGA
Resolution:
800×480 pixels
Number of colours
16.7 millions
Observation angle
± 85 °
Touchscreen
resistive
Camera
Resolution:
1.3 million pixels
Connections
Audio output
Line-out, Stereo
Audio input
Line-in, Stereo
Video input
FBAS/CVBS, 1 Vss
Slot for memory card
SDHC, max. 32 GB
9/10
82583103
J:0082583103
22.06.2012
Smart Panel
