The programming LED (9) lights up.
o
Assign physical address.
The programming LED goes out.
Loading the application software
i
The project design and commissioning are performed using external project design and
commissioning software.
i
Preset IP address at delivery: 192.168.178.113
o
Establish connection to the commissioning PC via IP connection.
o
Download configuration data with the commissioning software.
- or -
Configuration data is saved on the USB stick.
o
Insert USB stick in the corresponding socket (3). In KNX user interface, select the settings
icon
‘
and then the "Import" entry. Select disk drive and path and open the file with the
configuration data.
6 Appendix
6.1 Technical data
Supply
Rated voltage
AC 230 V ~
Mains frequency
50 / 60 Hz
Current consumption
max. 100 mA
Fine-wire fuse
Littelfuse/Wickmann 372 1160 T 1.6 L 250
Power consumption
approx. 2.5 W (Display off)
Power consumption
max. 11.5 W
Power consumption type
4.5 W (40% brightness)
Ambient conditions
Ambient temperature
0 ... +40 °C
Storage/transport temperature
-10 ... +70 °C
Relative humidity
15 ... 85 % (No moisture condensation)
Protection class
II
Display
Type
TFT 15.5 cm [5.7''] VGA
Resolution
640×480 pixels
Number of colours
262,000
Observation angle horizontal
± 70 °
Observation angle vertical
± 60 °
Touchscreen
resistive
USB
USB version
1.1/2.0
Connection
1× type A
Network
Type
10/100/1000 MBit/s Ethernet
Connection
RJ45-socket 8/4-pin
Dimensions
Dimensions W×H×D
approx. 220x140x48 mm (without design frame)
Dimensions screen W×H
approx. 115 x 86,5 mm
KNX medium
TP
Commissioning mode
S-mode
Rated voltage KNX
DC 21 ... 32 V SELV
Power consumption KNX
typical 150 mW
Connection mode KNX
Standard terminal
6.2 Accessories
5/6
82590203
J:0082590203
24.11.2014
Smart Panel 5.1 KNX
