Installing the connection box
Figure 5: Connection box
(8) Fastening holes
(9) Cable entry, surface-mounted
(10) Thin points for optional cable entries
o
For an additional flush-mounted cable entry or surface-mounted cable entry, break out the
appropriate thin point (10) (figure 5).
o
Align the presence detector so that the brightness sensor is on the side away from the
windows. This reduces the effects of scattered light.
o
Fasten connection both (4) with enclosed anchor/screw set through holes (8) (figure 5).
i
Alternatively, the presence detector can also be mounted on a 60 mm appliance box. The
screws are not included in the scope of delivery.
Connecting the presence detector
Figure 6: Connection diagram
Max. power cable length 100 m. This takes into account all connecting cables between the
presence detector and lamps.
5/11
82552623
J0082552623
04.09.2015
Light Management
Presence detector compact
