carried out with the aid of KNX-certified software. The latest versions of product database and
the technical descriptions are available on our website.
Intended use
-
Switching and brightness setting for lamps with operating devices with 1-10-V interface
-
Mounting on DIN rail according to EN 60715 in distribution boxes
Product characteristics
-
Relay switch contact for switching the connected loads
-
Manual operation of the relay independently of the bus
-
Various L1, L2 and L3 external conductors can be connected.
-
No additional power supply necessary
-
Feedback of switching state and brightness value
-
Switch position display
-
Switch-on and dimming behaviour can be set
-
Time dimmer can be set
-
Time functions: switch-on delay, switch-off delay, staircase lighting timer with run-on time
-
Integration into light scenes
4 Operation
Switching relay contacts manually
The status of the relay is reflected by the slide switches (3) on the front of the device (picture 1).
At the same time they can be used for manual operation of the relay outputs sing a suitable
tool.
o
Move slide switch to
ON
position.
Relay contact is closed, load is switched on.
o
Move slide switch to
OFF
position.
Relay contact is open, load is switched off.
i
The position of the slide switch immediately reflects the status of the relay, regardless of
whether the output is in NO or NC mode of operation.
i
Manual switching of the relays is independent of the bus. Thus in case of manual switching
there will be no feedback via the bus.
i
Outputs disabled via software can still be switched manually.
5 Information for electrically skilled persons
5.1 Fitting and electrical connection
DANGER!
Electrical shock when live parts are touched.
Electrical shocks can be fatal.
Before carrying out work on the device or load, disengage all the
corresponding circuit breakers. Cover up live parts in the working environment.
Fitting the device
Observe the temperature range. Ensure adequate cooling.
o
Mount device on DIN rail. Output terminals must be at the top.
2/6
82506533
J:0082506533
13.08.2010
Control unit 1-10 V, 3-gang
