KNX
Switching actuator / shutter actuator
Ref.-no.: 2116.10 REG
5. Characteristics
Shutter operation:
•
Switch-over time during change of movement direction adjustable
(observe the instructions of the motor manufacturer)
•
movement directions lockable by software control
•
Sun protection function
•
Safety shutdown during storms separately adjustable for each
shutter output
•
Response on bus voltage failure and return adjustable
For further characteristics, please read the corresponding EIB product
documentation.
6. Connection
Figure A
The bus line is connected to the bus connecting terminal (1).
The supply voltage and the loads are connected as per fig. A. The
illustration shows the connection of 3 lamps to outputs A 1 – A3 and of 2
motors to outputs A5/A6 and A7/A8 as an example. Further loads are
connected in the same way.
Please observe that the connected loads must be compatible with the
parameterization of the outputs.
The device can be connected to different phase conductors.
Further elements:
(2): manual controls and status indicators
(3): LED A1 – A16 indicate the switching state and the output selected
during manual operation.
3
