Radio hand-held transmitter
Product characteristics
–
The pushbutton functions switching, dimming, controlling blinds, value transmitter, calling
up moods, etc.
–
Two or four button pairs for rocker or push-button function
–
Two-colour LED to display actuation, sending status and actuator feedback
–
Battery-powered device
To ensure good transmission quality, keep a sufficient distance from any possible sources
of interference, e.g. metallic surfaces, microwave ovens, hi-fi and TV systems, ballasts or
transformers.
Energy saving mode
The device switches to the energy saving mode after a preset time. In energy saving mode, the
LEDs remains switched off. During operation, the energy saving mode is exited.
Operations from the energy saving mode are executed immediately.
Semi-bidirectional mode
Battery-operated KNX RF devices work in semi-bidirectional mode. If this device is not the only
control panel, we recommend the use of the "Rocker function", as otherwise two button-presses
may be necessary for operation.
4
Operation
Figure 1: Radio hand transmitter 2-gang and 4-gang
(1)
Status LED
(2)
Release the
Operating a function or load
￭
Switch: Short press on button.
￭
Dim: Long press on the button.
￭
Move Venetian blind: Long press on button.
￭
Stop or adjust Venetian blind: Short press on button.
￭
Call up light scene: Short press on button.
￭
Save light scene: Long press on button.
￭
Set value: Press button briefly.
LED function
The two-colour LED (1) indicates actuations, sending status and actuator feedback. The colour
assignment may deviate or the function may sometimes be invisible, depending on the pro-
gramming.
2 / 5
82590833
15.07.2019
j0082590833
