Figure 3: Installing the power pack
o
Slacken the two screws (5) and remove housing lid (4) (figure 1).
o
If necessary break out cable entry (8) for flush-mounted cable routing (figure 3).
o
Fasten power pack with two screws (6).
o
Route cables into the housing and connect to the terminals (7) (see Connecting the power
pack).
i
The power pack has double terminals for looping the connecting cables through.
o
Put the housing lid on and fasten with the screws.
Connecting the power pack
The power pack can be connected in various ways.
o
Select the appropriate connection diagram depending on what installations are present.
Figure 4: Connecting the power pack
Each time the push-button (normally closed contact) is pressed, a switching operation of the
power pack is triggered (figure 4).
4/9
32529813
J0082529813
02.11.2016
Radio Management
Radio performance unit
