The range of the system can be optimised by selecting the optimal installation location, taking
into account the structural circumstances.
Figure 2: Reduced range due to structural obstacles
Intended use
-
Radio-controlled switching of electrical loads for the duration of a settable time.
-
Operation with suitable radio motion detectors, radio transmitters and installation buttons
as an extension
-
Surface-mounted
Product characteristics
-
Device responds to radio telegrams from radio motion detectors
-
Operation possible via radio manual and wall transmitters
-
Brightness threshold settable
-
Switch-on time settable
-
Switch-on for 2 hours and switch-off for 2 hours possible
-
Can be integrated into All On and All Off
i
Combination with radio presence detector possible, but without light control
4 Operation
Normal operation
In normal operation the power pack switches the load on for the set switch-on time when a
taught radio motion detector telegram is received. Switching-on takes place depending on the
brightness.
Taught radio hand transmitters, radio wall transmitter or installation buttons, NC contacts,
switch the load on the power pack independently of the brightness.
i
Switching on the mains voltage of the power pack always triggers a switching operation on
the power pack, regardless of the brightness setting.
The red LED (2) indicates the reception of a radio telegram and the green LED (3) indicates the
state of the switching output, see the next table.
red LED
green LED
Receives radio telegram
1 second to
No change
Battery of the motion detector
weak
on
No change
Load is switched on
No change
on
Programming mode active
flashes
off
Transmitter taught
on
on
2/9
32529813
J0082529813
02.11.2016
Radio Management
Radio performance unit
