Removing the cover
Figure 10: Removing the cover
o
Press the cover to the side and pull it off (figure 10).
5.2 Commissioning
Load the address and the application software
o
Switch on the bus voltage
o
Assign physical address.
o
Load the application software into the device.
o
Note the physical address on the device label.
6 Appendix
6.1 Technical data
Supply
Rated voltage
AC 230 / 240 V ~
Mains frequency
50 / 60 Hz
Power loss
max. 3 W
Ambient conditions
Ambient temperature
-5 ... +45 °C
Storage/transport temperature
-25 ... +70 °C
Outputs
Contact type
µ contact, potential-free NO contact
Switching voltage
AC 250 V ~
Switching current AC1
10 A
Switching current AC3
10 A
Loads per output
Ohmic load
2300 W
Capacitive load 10 A
max. 140 µF
Motors
1380 VA
Switch-on current 200 µs
max. 800 A
Switch-on current 20 ms
max. 165 A
Lamp loads
Incandescent lamps
2300 W
HV halogen lamps
2300 W
LV halogen lamps with Tronic transformer
1500 W
LV halogen lamps with inductive transformer
1200 VA
Fluorescent lamps T5/T8
9/11
82565513
J:0082565513
20.12.2011
Fan coil actuator 2-gang
