-
Control of Radio Management actuators by eNet transmitters
-
Mounting of SCHUKO sockets indoors
i
The following Radio Management devices are not supported: motion detectors, presence
detectors, HVAC devices, repeaters, window contacts, KNX gateways and Centrals.
Product characteristics
-
Reception of Radio Management commands and conversion into eNet commands
-
Reception of eNet commands and conversion into Radio Management commands
-
24 transmitter channels from both systems can be connected
-
Scene 1 to scene 5 from both systems can be recalled and changed
-
All On and All Off can be recalled from both systems
-
Master dimming function
Supplementary functions with eNet server:
-
Update of the device software
-
Repeater function
-
Reading of error memory
Functional description
Figure 2: Inter-system radio operation
This device serves an interface between the Radio Management, 433 MHz, and eNet, 868 MHz
systems. It allows operation of the actuators in the other system (figure 2).
i
Status feedback is only provided between the transmitter and the gateway on the eNet
side.
Limited functionality
The eNet system has a wider range of functions than the radio management system. For this
reason, the following functions are not possible using the radio gateway:
-
Scenes 6...16
-
Threshold value functions and disabling functions
-
Save switch-on brightness using transmitter
-
Transmission status and status feedbacks
4 Information for electrically skilled persons
Fitting
Maintain a distance of at least 0.5 m from metal surfaces and electrical devices, e.g. microwave
ovens, hi-fi and TV systems, electronic ballasts or transformers.
Maintain a distance of at least 0.3 m between transmitter and receiver in order to prevent
overmodulation of the receiver.
2/8
82582113
J:0082582113
13.03.2014
eNet
Radio converter in SCHUKO housing
