Jung A3181-1-01, Руководство по эксплуатации

Страница: 6 / 13

Universal automatic switch 1.1 m
Switching the light on manually
￭ Move the slide switch to the ON position.
Switching the light off manually
￭ Move the slide switch to the OFF position.
Switching on the Automatic operating mode
￭ Move the slide switch to the AUTO position.
Status LED
Behind the sensor window (4) there are status LEDs for indicating different states of operation
(Figure
8
).
Figure
8
: Status LED
YE Yellow. OFF operating mode is active.
GN Green. ON operating mode is active.
BU Blue. Movement detected (parameter-dependent) or IR reception.
RD Red. Programming mode is active.
6 IR remote control
Function buttons IR remote control
Button Function
¿ Detection of a motion is sent for function block
1. The automatic mode is exited.
Á End of a motion is sent for function block 1.
The automatic mode is exited.
À The automatic mode is activated again for
function block 1.
The ON status is first exited after a new mo-
tion detection.
Setting buttons IR remote control
Button Function
´ Increase sensitivity
² Reduce sensitivity
³ Reset sensitivity to presetting
Ê Function block 1: brightness threshold 1 fc
Ë Function block 1: brightness threshold 4.7 fc
Ì Function block 1: brightness threshold 14 fc
6 / 13
32597025 05.09.2018
J0082597025