i
If several channels or light scenes of a radio transmitter have been taught, they all must be
deleted individually.
Integrating the end position of the Venetian blind into a light scene
The upper or lower end position of a Venetian blind can be called up via light scene buttons of a
radio transmitter.
Light scene button of the radio transmitter has been taught in the actuator.
o
Move Venetian blind to the desired end position. The relay of the Venetian blind control
must switch off automatically after two minutes.
o
Press desired light scene button of the radio transmitter for at least 3 seconds.
The end position of the Venetian blind has been saved as a light scene.
6 Appendix
6.1 Technical data
Ambient temperature
0 ... +55 °C
Switch-over time for direction change
approx. 1 s
Switch-on time
approx. 2 min
Brightness setting
Art. No. ..5232F..
—
Art. No. ..5232FS..
approx. 5000 ... 80000 lx
Radio frequency
433.05 MHz ... 434.79 MHz
Receiver category
2
Teachable radio transmitter
max. 30
6.2 Troubleshooting
The sun protection is not performed properly, instead the Venetian blind moves into the
direction of the lower end position.
Cause: Sun sensor is connected in reverse polarity.
Connect the sun sensor with the correct polarity.
6.3 Accessories
6.4 Conformity
Albrecht Jung GmbH & Co. KG hereby declares that the radio system type
Art. No. ..5232F.. / ..5232FS..
corresponds to the directive 2014/53/EU. You can find the full article number on the device. The
complete text of the EU Declaration of Conformity is available under the Internet address:
www.jung.de/ce
6.5 Warranty
The warranty follows about the specialty store in between the legal framework as provided for
by law.
ALBRECHT JUNG GMBH & CO. KG
Volmestraße 1
58579 Schalksmühle
GERMANY
Telefon: +49 2355 806-0
Telefax: +49 2355 806-204
[email protected]
www.jung.de
7/7
32524333
J0082524333
13.09.2016
Blinds Management
Centre plate with radio receiver, Centre plate with radio receiver and
sensor connection
