background image

Flat wall-mounted radio transmitter 

Radio Management  

Flat wall-mounted radio transmitter 1-channel 

Art.-No.: ..41F..

Flat wall-mounted radio transmitter 2-channel 

Art.-No.: ..42F..

Flat wall-mounted radio transmitter 4-channel 

Art.-No.: ..44F..

Operating instructions 

1 Safety instructions 

Electrical equipment may only be installed and fitted by electrically skilled persons. 

Failure to observe the instructions may cause damage to the device and result in fire and 
other hazards. 

Keep button cells out of reach of children! If button cells are swallowed, get medical help 
immediately. 

Risk of explosion! Do not throw batteries into fire. 

Risk of explosion! Do not recharge batteries. 

The radio communication takes place via a non-exclusively available transmission path, 
and is therefore not suitable for safety-related applications, such as emergency stop and 
emergency call. 

These instructions are an integral part of the product, and must remain with the end 
customer. 

2 Device components 

Figure 1 

(1)  Wall transmitter, CD range 
(2)  Base plate 
(3)  Fastening screws 
(4)  Inscription panel 
(5)  Inscription panel cover 
(6)  Wall transmitter, LS range 

1/8 

32532713 
J:0082532713 

09.12.2010 

Содержание 41F Series









Отзывы: