Switch actuator / blinds actuator
Switch actuator, 6-gang / blinds actuator, 3-gang
Art. no.: 230061SR
Switch actuator, 16-gang / blinds actuator, 8-gang
Art. no.: 230161SR
Switch actuator, 24-gang / blinds actuator, 12-gang
Art. no.: 230241SR
Operating instructions
1
Safety instructions
Electrical devices may only be mounted and connected by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
The device may not be opened or operated outside the technical specifications.
Danger of electric shock. Device is not suitable for disconnection from supply voltage.
Danger of electric shock on the SELV/PELV installation. Do not connect loads for mains voltage
and SELV/PELV together to the device.
For parallel connection of several motors to an output it is essential to observe the correspond-
ing instructions of the manufacturers, and to use a cut-off relay if necessary. The motors may be
destroyed.
Use only venetian blind motors with mechanical or electronic limit switches. Check the limit
switches for correct adjustment. Observe the specifications of the motor manufacturers. Device
can be damaged.
Do not connect any three-phase motors. Device can be damaged.
These instructions are an integral part of the product, and must remain with the end customer.
2
Device components
Figure 1: Device components
(1)
Button field for manual operation
(2)
Programming button and LED
(3)
KNX connection
(4)
Status LEDs for outputs
(5)
Load connections (relay outputs)
1 / 9
82402603
15.05.2020
J0082402603
