Jung 2204 REG, Руководство по эксплуатации

Страница: 29 / 52

29
Manual operation
The actuators with manual operation can be operated in 3 modes:
1. bus mode (normal operation)
2. continuous manual operation (bus mode deactivated)
3. temporary manual operation (device switches back to bus
mode after 5 seconds if no button is pressed)
Operation: A long press (> 5s) on the button (1) activates or
deactivates the continuous manual mode, whereas a short press
(< 1s) does the same for temporary manual operation (Fig. D). On
activation of a manual mode, all channels are switched off.
During continuous manual operation, LED (1) lights up.
In the manual mode, the switching channel can be selected with
the
button (1).
The pertaining two LEDs (5) start flashing. The remaining LEDs (5)
indicate the switching state of the non-selected outputs. Buttons
>
(3) and
=
(4) are the executing control buttons.
A long press (> 1s) on the
=
button (4) causes the blind of the
selected channel to travel upwards. The
>
button (3) controls the
down movement. A short press on the
>
(3) or
=
button (4) stops
the blind.
After having switched once through all channels in manual operation,
the device returns to the bus mode. In the continuous manual mode,
the OFF button (2) switches off all relays.
GB