￭
Press the
ƨ
and
Ƙ
buttons simultaneously for longer than 10 seconds.
A countdown runs in the display. When "0" is reached, the actual temperature
is shown in the display.
The active temperature sensor is shown in the display when the actual tem-
perature indication is selected.
ƻ
or
ƻ
and
ƺ
: The measured value is provided by the internal sensor.
ƺ
: The measured value is provided by the remote sensor connected to the in-
sert.
￭
Press the
ƨ
and
Ƙ
buttons simultaneously again for more than 10
seconds.
A countdown runs in the display. When "0" is reached, the current time is dis-
played.
Use the same operating step to switch back to target temperature indication.
￭
Press the
ƨ
and
Ƨ
buttons simultaneously for longer than 10 seconds.
A countdown runs in the display. When "0" is reached, the display is switched
on continuously.
Use the same operating step to switch the display off again after 2 minutes.
The display briefly turns dark to indicate confirmation.
In target or actual temperature indication mode, the
ƨ
or
Ƨ
button can be pressed
for more than 1 second to indicate the current time as long as the button is actuated.
Resetting the cover to the default setting
￭
Press the
Ƨ
and
Ƙ
buttons simultaneously for 10 seconds.
A countdown runs in the display. The reset is performed with "0".
The default setting is restored. The year flashes in the display and the device
must be recommissioned (see Commissioning section).
9
Information for electrically skilled persons
This device includes an integrated battery. At the end of its useful life, dispose
of the device together with the battery in accordance with the environmental
regulations. Do not throw device into household waste. Consult your local authorities
about environmentally friendly disposal. According to statutory provisions, the end
consumer is obligated to return the device.
DANGER!
Mortal danger of electric shock
Disconnect the device. Cover up live parts.
LB Management room thermostat display
12 / 14
32401513
17.08.2022
J0082401513
