LB management
Universal timer Bluetooth
Ɵ
21:30, Fr
ƞ
09:00, Sat
Ɵ
21:30, Sat
ƞ
09:00, Sun
Ɵ
21:00, Sun
Astro function is deactivated
–
Automatic summer/winter time changeover is active
No switching times are available when operating on a switching/dimming insert
4
Commissioning
Install app on a mobile end device
Requirement for operation via app is a mobile end device with Bluetooth interface, running the
Android operating system or iOS.
￭
Download and install the Bluetooth app Clever Config from the iTunes App Store (iOS) or
Google Play Store (Android).
Couple mobile end devices via Bluetooth
Precondition: The insert must be connected and switched off. The cover is placed on the insert
and the mobile end device is close to the cover.
￭
Activate coupling mode: Press the
Ʃ
button (4b) for more than 4 seconds.
The blue LED flashes slowly. The coupling mode is active for one minute.
￭
Start the Clever Config app and search for the device to be coupled.
The Jung Timer BT cover is displayed in the app.
￭
Perform coupling.
The coupling mode is automatically exited after successful coupling. The blue LED lights
up to confirm an active connection.
A maximum of 8 mobile end devices can be coupled with a cover. When coupling the 9th
device, the least used device will be deleted.
To be able to perform position movements of the blind/shutter on a Venetian blind insert,
a reference movement is performed in the upper end position after the programming. This
reference movement should not be stopped.
5
Operation of Venetian blind and shutters
All settings and operations are also possible via Bluetooth app.
Moving the blind/shutter
￭
Press button (3a) or (3b) for longer than one second.
The blind/shutter moves in the desired direction to the end position or stops when the but-
ton is pressed again.
If a ventilation position has been saved, the blind stops in the ventilation position when
moving down (see Saving the ventilation position).
Adjusting the slats
￭
Press the button (3a) or (3b) for less than one second.
Saving blind/shutter running time
To perform positioning movements, the blind/shutter running time has to be saved beforehand.
To save blind/shutter running time, the Venetian blind must be moved to the upper end position
and the status LED (6) switch off automatically.
￭
From the top end position, press the button (3b) for longer than second.
The blind/shutter moves in the lower end position direction.
3 / 10
32598103
02.10.2019
J0082598103
