6
3.Clutch lever adjustment
Put the clutch handle in the "on"
○
1
position, remove the pin between the clutch adjusting fork and the
movable release claw, loosen the lock nut of the adjusting fork
○
3
, and rotate the adjusting fork clockwise
or anticlockwise to adjust the length of the clutch cable
○
2
,so that the clutch can be completely separated
when the clutch handle
○
1
is at the "off" position. If the clutch is not completely separated, the length of
the pull rod shall be shortened; if the clutch is placed in the "on" position, sometimes there is a fight in
case of sliding, the clutch cable
○
2
shall be lengthened to make the free stroke of clutch handle
○
1
in the
clutch limit frame be 10-15mm.
○
1
Clutch handle
○
2
Clutch cable
○
3
Clutch adjusting fork and lock nut
4.Steering handle adjustment
○
1
Steering handle
○
2
Pin shaft and split pin
○
3
Steering cable
○
4
Steering adjusting fork
When adjusting the steering handle: loosen the pin shaft and split pin
○
2
, and withdraw the steering
cable
○
3
from the steering handle
○
1
. If it does not separate, rotate the steering cable
○
3
clockwise and
shorten the length of the cable through the steering adjusting fork
○
4
; if it does not return to the original
position, rotate the steering cable
○
4
anticlockwise, and make the length
○
1
of the cable longer through the
steering adjusting fork
○
4
, so that the distance between the steering handle and the armrest rubber sleeve is
10-15mm The machine can turn and return reliably without continuous abnormal noise.
