7
First we will complete the two sections of
the trampoline frame.
B
A
Insert the Center leg and leg extensions into upright
.r
o
t
c
e
n
n
o
c
-
T
n
o
e
b
u
t
Note:
You may need to tap the leg extension in
using a rubber mallet or by placing a piece of
wood over the top of the tube. Do not use a metal
hammer on the metal tube as this may distort the
end of tube.
D
Screw one of the self tapping screws through the
slot in the T-connector and into the hole in
the leg extension using the cross-head screwdriver.
STEP 1 :
ASSEMBLING THE FRAME
You will need the following parts to complete
section 1a:
4 x L-Top tube with Welded connector
(2 pcs one side A marking and one side B marking,
2 pcs one side C marking and one side D marking)
- Part A & Q
e
b
u
t
p
o
T
x
2
- Part B
e
b
u
t
p
o
T
x
2
- Part C
8 x Leg extensions
- Part E
4 x Centre legs
- Part D
A
B
D
E
L-Top tube
Top tube B, C marking
Centre leg
Leg extension
16 x Self tapping screws & washers -
- Part N
You will also need a cross-head screwdriver
(not supplied)
.
Self tapping screw and washer
Cross-head screwdriver
With A marking
With A marking
With D marking
With B marking
With B marking
With C marking
B
C
Top tube A, D marking
With A marking
With A marking
With D marking
With D marking
With C marking
With B marking
With B marking
With C marking
Slot the narrow end of the top tube with
T-connector. Ensure the welded tube of
the T-connector is facing inwards.