Recharging Jump-N-Carry
Recharging Using AC Power
The Jump-N-Carry
®
requires a household extension cord (not included) for AC charging.
• Plug the female end of the extension cord into the charger plug on the front of the
unit. The charger plug has 2 blades and resembles a standard household plug that
would fit into a 120 Volt AC wall outlet.
• Plug the male end of the extension cord into a 120 Volt AC outlet.
NOTE: The Jump-N-Carry
®
features automatic AC recharging, which eliminates
the possibility of overcharging the unit.
Charge the unit for the recommended amount of time, as indicated below. Once the time
has expired, check the battery charging status gauge (see Battery Status Gauge
section) to ensure charging is complete. It is recommended that the Jump-N-Carry
®
be
recharged after every use.
SUGGESTED AC RECHARGE TIMES
After a single jump start:
1 hour
After using the air compressor:
12 hours or overnight
After using as portable power:
24-36 hours
Recharging Using 12 Volt Power
Jump-N-Carry
®
may also be recharged by using the included Male-Male 12V Extension
Cord (Part No. ESA1). Plug one end into the 12 Volt outlet on the Jump-N-Carry
®
and
the other end into the vehicle’s 12 Volt power port socket. The vehicle must be running
to charge with this method.
SUGGESTED 12 VOLT RECHARGE TIMES
After jump starting:
20 minuntes
After using the air compressor:
2 hours
After using as portable power:
2 hours
NOTE: It is strongly recommended that the Jump-N-Carry
®
be recharged using the
AC charging method. Recharging from a vehicle’s 12 volt power outlet should be
done only when the AC alternative is unavailable.
