JUMO TYA S201, Руководство по эксплуатации

Страница: 47 / 92

V1.00/EN/00709718 [Thyristor power switch TYA S201] 47
4 Operation
4.2.2 Power controller
4.2.3 Setpoint value configuration
4.2.4 Monitoring
The value to be monitored can be adjusted.
v
Chapter 5.1.5 "Überwachungen"
The load voltage was used in this example.
Value range Description
0 to 75 to 90° el 75° el is set per default.
If "
α
start" is set to "No" in the configuration, this window is
not displayed and
α
start is set to 0°el.
k
/ bold = default setting
Value range Description
Current load voltage
0 to 100 %
of the output level Note:
This setting is only available if Power controller
r
Thyristor
control
r
Continuous (power controller) is selected.
k
/ bold = default setting
Control signal
P
Base load: 680 W
Maximum
Output level: 3680 W
0 mA
20 mA
3000W 0...20mA
Ⳏ
Base load
Value range Description
Current measured
value
0 to 9999.9 The absolute minimum limit values for load voltage, load current,
power, resistance, mains voltage, or device temperature can be moni-
tored.
v
Chapter 5.1.5 "Überwachungen"
Example:
An alarm is triggered if the voltage falls below 20 V.