JUMO flowTRANS MAG H01, Руководство по эксплуатации

Страница: 9 / 260

9
1 Safety
1 Safety
1.1 General information and notes for the reader
Before mounting and starting up the unit, this manual must be read carefully.
The manual is an integral part of the product and must be stored for subsequent use. In the interest of
clarity, the manual does not contain all the detailed information about all product versions and cannot
take into consideration every conceivable case involving the installation, operation or maintenance.
If you would like further information or if problems occur that are not covered by the manual, the required
information can be obtained from the manufacturer.
The contents of this manual are not part of or a change to a previous or existing agreement, assurance
or legal relationship.
This product is built based on state-of-the-art technology and safe to use. It has been tested and was
shipped from the factory in perfect working order. To maintain this condition for its service life, the infor-
mation contained in these instructions must be observed and followed.
Modifications and repairs to the product may only be performed if expressly permitted by this manual.
Optimum protection of the personnel and the environment and the safe and smooth operation of this
product are only ensured by observing all the safety information as well as all safety and warning sym-
bols contained in this manual.
Notes and symbols attached directly on the product must be observed. They may not be removed and
must be fully legible at all times.
1.2 Other applicable device documentation
This document "JUMO flowTRANS MAG S/H - Operating Manual for Devices 406012 - 406019" is sup-
plemented by the documents listed below:
The symbol on the nameplate refers to:
?
?
Document name Document type For devices
JUMO flowTRANS MAG S/H Ex Safety Manual
a
a
Optional - depending on the device version
406012 - 406019
JUMO flowTRANS MAG S/H SIL
a
Safety Manual 406012 - 406019
IMPORTANT (NOTE)!
The supplementary document "JUMO flowTRANS MAG S/H - Ex Safety Manual for Devices 406012 -
406019" is enclosed with measuring systems used in potentially explosive areas.
The information and data contained in the document must also be strictly observed.
IMPORTANT (NOTE)!
The supplementary document "JUMO flowTRANS MAG S/H - SIL Safety Manual for Devices 406012 -
406019" is enclosed with measuring systems with an SIL-certified design (safety integrity level).
The information and data contained in the document must also be strictly observed.
IMPORTANT (NOTE)!
All the documentation, declarations of conformity and certificates are also available in the download area
at www.jumo.de.