JUMO dTRANS T02 PCP, Руководство по эксплуатации

Страница: 43 / 48

19
5 Tips ...
... of a more general nature
H
If none of the parameters can be altered, then you may have
locked the operation on the instrument through the setup
program. Please check the setting with the help of the setup
program.
The parameter can only be modified if the level at which the
parameter can be found is not inhibited.
H
Both outputs (current and voltage) are always available at
the same time. However, the output that has not been acti-
vated in the setup program, or by the default setting, only
has an accuracy of approximately ± 2% of full scale.
A
The frequency output will not be operated as long as the
setup plug remains plugged in.