JUMO dTRANS p33, Руководство по эксплуатации

Страница: 67 / 136

21
4 Mounting
4.4 Pressure connection
Seals
DANGER!
A flat seal, e.g. according to DIN EN 837, must be used for the appropriate process connection
for the ignition protection type intrinsic safety!
 The pressure connection must be checked for seal tightness once established!
If the pressure transmitter is screwed into a threaded hole, the
full length of the thread of the pres-
sure transmitter must be used!
NOTE!
The correct tightening torque is dependent on the size, material, and form of the seal used, as well as
the pressure connection of the pressure transmitter.
4.5 Cable connection inside terminal head
1. Press down the connection terminal (A) with a small screwdriver.
2. Insert the conductor into the opening, release connection terminal.
(A) Connection terminal
(
A
)