JUMO dTRANS p33, Руководство по эксплуатации

Страница: 62 / 136

4 Mounting
16
4.2 Accessories
4.2.1 Cable clamp
The wire holder, part no. 00753260, holds the probe in the liquid at a defined depth and provides strain
relief. Use of the wire holder ensures that the cable is not deformed in an unacceptable manner.
The wire holder is compatible with all JUMO level probes.
The clamping range is 4.8 to 10 mm. The maximum tensile strength is 390 N.
The cable clamp is made of UV-resistant, corrosion-free and fiberglass-reinforced polyamide. The cen-
tral elongated holes are provided for optional, application-dependent fixation of the cable to prevent the
clamping jaws from sliding upwards. The side elongated hole is provided for fixing additional cable
length.
NOTE!
The gray clamping jaws are to be pushed firmly shut by the user and the desired clamping function then
checked.
4.2.2 Sealing screw
For closed containers or water wells with a well head, the cable should be guided through a sealing
screw, part no. 00333329 and secured. The sealing screw is made up of a G 1 1/2" thread and is used
to route the cable.
30
39
14
G1 1/2 A