JUMO AQUIS touch S, Руководство по сборке

Страница: 11 / 150

11
10 Configuration
10.4 Display
10.4.1 General
Open: Device Menu > Configuration > Display > General
Configuration point Selection/
setting option
Explanation
Lock touchscreen Selection from
binary selector Digital signal that blocks operation of the touch-
screen (e.g. key switch for locking operation)
Simulation of
inputs Yes
No When this function is activated, alternating on/off
signals are simulated automatically at the binary
inputs and continuous value changes at the ana-
log inputs
This function is used for troubleshooting. Deacti-
vate it during normal operation.
Main screen Selection of an
operation screen from
the operation loop Selection of the operation screen as main screen
The main screen appears after the device has
been switched on or the "Home" button has been
pressed.
Display 1 and 2 gen-
eral screen Yes
No Individual operation screens can be shown or
hidden in the operation loop here.
Show detailed screen
1 to 6
Show diagram
1 and 2
Show process screen
Show controller
overview
Show controller
1 to 4
Show alarms
Yes
No Activation or deactivation of alarm visualization in
the title bar of the operation screens