JUMO AQUIS touch P, Описание интерфейса

Страница: 38 / 52

6 Project planning
38
3. The module configuration contains 1 tab for each activated module. Define the number of modules
you want to configure. To add modules, press the "Slot +" button. To reduce the number of modules,
click on the next module tab to activate it and press the "Slot -" button.
4. Now determine the type you require for each module in the "Module type" field (see
chapter 4.2.2 "Modules", page 11).
5. In each module, select the IO data required for the cyclical communication.
a) Open the configuration dialog for each item in the module list by double-clicking on the required
item or by selecting it and pressing the "Edit" button.
Configuration dialog for IO data
b) Double-clicking on the selection field at the top opens the selector with selectable device data,
which you can assign to the module list item. In the "Comment" field, you can enter a name for
the data point (e.g. equipment designation). The content of the comment field also appears in
the module configuration printout to make it easier to identify the IO data.